09-25-2023, 03:18 AM
Steel Ball factory Introduction
Steel Ball For Ball Mill is a grinding accessory of steel slag ball mill, which is widely used in metallurgy, mining, cement, building materials, power, and other fields. When the impact energy generated by the steel ball exceeds the strength limit of the material, the material will be crushed. However, if the excessive impact force is applied to the lining plate of the ball mill, the stress of the cylinder will also increase, and the energy consumption will also be large. Therefore, when choosing a Steel Ball For Ball Mill, you can mainly consider the impact force. In addition, our products have various diameters, which can adapt to various materials and increase the contact area between materials and steel balls with a large surface area, thus improving the grinding efficiency.
Features
The main materials of Steel Ball For Ball Mill are 0.76% - 0.90% carbon, 0.15% - 0.37% silicon, 0.75% - 0.90% manganese, and 0.20% - 0.60% chromium. The toughness, impact resistance and wear resistance are excellent. And it won't crack easily. By grading large and small balls, you can reduce the gap between steel balls, increase the packing density of steel balls, and make them have proper material storage capacity. On the one hand, the material flow rate can be controlled, and the residence time can be prolonged, so as to obtain full grinding; On the other hand, it can also extrude the materials, which is convenient for impact crushing of large balls
Parameter聽
ModelDiameter锛坢m锛?/div>Main chemical composition of materialWeight
锛坘g锛?/div>
D20mm20mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%0.038
D25mm25mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%0.07
D30mm30mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%0.125
D40mm40mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%0.296
D50mm50mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%0.578
D60mm60mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%0.999
D65mm65mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%1.25
D75mm75mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%1.88
D80mm80mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%2.3
D80mm80mmC:0.60%-0.66%,Si:1.70%-2.0%,Mn:0.65%-0.80%,Cr:0.75%-0.90%2.3
D90mm90mmC:0.60%-0.66%,Si:1.70%-2.0%,Mn:0.65%-0.80%,Cr:0.75%-0.90%3
D100mm100mmC:0.60%-0.66%,Si:1.70%-2.0%,Mn:0.65%-0.80%,Cr:0.75%-0.90%4.1103
D105mm105mmC:0.60%-0.66%,Si:1.70%-2.0%,Mn:0.65%-0.80%,Cr:0.75%-0.90%4.7582
D120mm120mmC:0.60%-0.66%,Si:1.70%-2.0%,Mn:0.65%-0.80%,Cr:0.75%-0.90%7.1026
D125mm125mmC:0.60%-0.66%,Si:1.70%-2.0%,Mn:0.65%-0.80%,Cr:0.75%-0.90%8.0279
D140mm140mmC:0.75%-0.85%,Si:0.20%-0.40%,Mn:0.92%-1.02%,Cr:0.88%-0.96%11.2728
D150mm150mmC:0.75%-0.85%,Si:0.20%-0.40%,Mn:0.92%-1.02%,Cr:0.88%-0.96%13.8651
Related Product聽
We Are Experts In Mining Equipment
Our Factory
Our CertificationSteel Ball factory
website:http://www.z-locomotives.com/steel-ball/
Steel Ball For Ball Mill is a grinding accessory of steel slag ball mill, which is widely used in metallurgy, mining, cement, building materials, power, and other fields. When the impact energy generated by the steel ball exceeds the strength limit of the material, the material will be crushed. However, if the excessive impact force is applied to the lining plate of the ball mill, the stress of the cylinder will also increase, and the energy consumption will also be large. Therefore, when choosing a Steel Ball For Ball Mill, you can mainly consider the impact force. In addition, our products have various diameters, which can adapt to various materials and increase the contact area between materials and steel balls with a large surface area, thus improving the grinding efficiency.
Features
The main materials of Steel Ball For Ball Mill are 0.76% - 0.90% carbon, 0.15% - 0.37% silicon, 0.75% - 0.90% manganese, and 0.20% - 0.60% chromium. The toughness, impact resistance and wear resistance are excellent. And it won't crack easily. By grading large and small balls, you can reduce the gap between steel balls, increase the packing density of steel balls, and make them have proper material storage capacity. On the one hand, the material flow rate can be controlled, and the residence time can be prolonged, so as to obtain full grinding; On the other hand, it can also extrude the materials, which is convenient for impact crushing of large balls
Parameter聽
ModelDiameter锛坢m锛?/div>Main chemical composition of materialWeight
锛坘g锛?/div>
D20mm20mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%0.038
D25mm25mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%0.07
D30mm30mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%0.125
D40mm40mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%0.296
D50mm50mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%0.578
D60mm60mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%0.999
D65mm65mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%1.25
D75mm75mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%1.88
D80mm80mmC:0.76%-0.90%,Si:0.15%-0.37%,Mn:0.75%-0.90%,Cr:0.20%-0.60%2.3
D80mm80mmC:0.60%-0.66%,Si:1.70%-2.0%,Mn:0.65%-0.80%,Cr:0.75%-0.90%2.3
D90mm90mmC:0.60%-0.66%,Si:1.70%-2.0%,Mn:0.65%-0.80%,Cr:0.75%-0.90%3
D100mm100mmC:0.60%-0.66%,Si:1.70%-2.0%,Mn:0.65%-0.80%,Cr:0.75%-0.90%4.1103
D105mm105mmC:0.60%-0.66%,Si:1.70%-2.0%,Mn:0.65%-0.80%,Cr:0.75%-0.90%4.7582
D120mm120mmC:0.60%-0.66%,Si:1.70%-2.0%,Mn:0.65%-0.80%,Cr:0.75%-0.90%7.1026
D125mm125mmC:0.60%-0.66%,Si:1.70%-2.0%,Mn:0.65%-0.80%,Cr:0.75%-0.90%8.0279
D140mm140mmC:0.75%-0.85%,Si:0.20%-0.40%,Mn:0.92%-1.02%,Cr:0.88%-0.96%11.2728
D150mm150mmC:0.75%-0.85%,Si:0.20%-0.40%,Mn:0.92%-1.02%,Cr:0.88%-0.96%13.8651
Related Product聽
We Are Experts In Mining Equipment
Our Factory
Our CertificationSteel Ball factory
website:http://www.z-locomotives.com/steel-ball/